Red dot sights are one of the best types of gun sights for hunting or shooting. These gun sights are especially used due to the fact that red dot sights are more effective in faster target acquisition than any other gun sight.
However, the efficiency of red dot sights is not a comes-with-the-package thing. There are a number of factors that could potentially affect efficiency. Among them, proper adjustment of the red dot sight is a requirement. If you don’t know how to adjust a red dot sight, chances are you won’t be able to shoot as accurately as you would expect neither will you get the full extent of red dot sights faster target acquisition.
Even though due to the availability of red dot sights in the market, people gradually grew comfortable using the red dot sights, some aspects of the sights are still unknown to many. I’m talking about the ignorance among red dot sight users, especially the users on how to adjust a red dot sight to a firearm.
So, here I am – explaining how to adjust a red dot sight to a firearm.
Our Top 3 Red Dot Sight
Bushnell Red Dot Sight
- Lightweight and compact
- Unlimited eye relief
- Great under low-light
- Includes mount
Vortex Red Dot Sight
- Offer 1x magnification
- Long run time
- Battery-powered; battery included
- Solid build and construction
Check our 10 best red dot sights reviews in 2021. we try to review the best products on the market. we understand the value of your money.
How To Adjust A Red Dot Sight To The Gun Rail?
- Unload the gun and take the safety measure
- Choose between a Philips screwdriver or an Allen wrench
- Loosen the screws that are holding the gun sight to the gun rail
- Adjust the gunsight according to your preference
- Screw the red dot sight tightly
- Correct the position and make further adjustments if needed.
Step 1: Unload the gun and take the safety measure
Before you start the process, it is important that you ensure the safety of your gun.
First of all, unload the gun so that there are no chances of accidents. Remove any and all cartridges from the gun. Then as the last part for the safety of your gun during the adjustment process, activate the firearm’s safety switch.
Step 2: Choose between a Philips screwdriver or an Allen wrench
To adjust the red dot sight to your gun, you will need some tools.
Depending on the red dot sight, you might need a Philips screwdriver or an Allen wrench. Between these two, the Philips screwdriver ones are more common. Sometimes, the red dot sight will come with one. But if your unit doesn’t come with one, you can buy it from any hardware store
Step 3: Loosen the screws that are holding the gun sight to the gun rail
Before you adjust the red dot sight on the gun rail, it is crucial that you loosen the existing screws using the Philips Screwdriver. If your red dot sight doesn’t work with the Philips screw, you should try with an Allen Wrench. With the screws or whatever joining mechanism your gun sight and your gun have, you will be able to operate it with either a Philips screwdriver or an Allen Wrench.
Remember, you don’t need to completely remove the screws, you just need to loosen them enough to work with them. Removing them completely from the gun and the gunsight could cause you the trouble to reinstate the gun sight properly.
Step 4: Adjust the gunsight according to your preference
Now, the most important step. In this step, you need to adjust the red dot sight on the gun rail.
Some firearm users struggle to determine where should the red dot sight go. This is very simple. The only thing that you should consider to determine the distance is your comfort.
Step 5: Screw the red dot sight tightly
After you set up the red dot sight in its proper place, you need to tighten the screws. This is very important. If the red dot sight is not tightened properly, the sight can move from its place while you walk or during the recoil.
When you will shoot with the loose gun sight, the recoil will cause the gun sight to move even further from where it should have been. When this happens and the gun sight moves from its place, accuracy is compromised and you will start to miss your target. So, make sure this doesn’t happen to you.
Step 6: Correct the position and make further adjustments if needed.
Just because you have tightened the red dot sight to your gun tightly, doesn’t mean your gun sight is fixed at its place.
After you adjust the sight, do a practice run and see how the adjusted gun sight is working for you. If you realize that it needs further adjustment, take your time to adjust it once again to get the best position for your red dot sight on the gun rail.
Since you have learned how to adjust the red dot sight to your gun sight, you might also want to know how to adjust the windage and elevation.
How to adjust the Windage and Elevation?
- Safety of the guns
- Remove the Knob covers from the red dot sight
- Twist the Knobs to adjust the windage
- Twist the knob to adjust the elevation
Step 1: Safety of the guns
Similar to what you did before, it is important that you ensure the safety of your gun.
At first, unload your gun to prevent any accidents from happening. Then, remove any and all cartridges from your gun. Then as the last part for the safety of the gun during the windage & elevation adjustment process, activate the firearm’s safety switch.
Step 2: Remove the Knob covers from the red dot sight
Next step will be to remove the knob covers from the red dot sight if needed. Then set all the knobs off to a side.
Step 3: Twist the Knobs to adjust the windage
Twist off the knobs on a side of your sight. This is used to adjust the windage which will determine where the bullets will land horizontally. Generally, each click of the knob is supposed to move the bullet’s target or impact point left or right by 0.5 inches at a 100 yards distance. To know which way to turn the knob for left or right, look for an arrow on the knob.
Step 4: Twist the knob to adjust the elevation
Twist off the knobs on a side of your sight. This is used to adjust the windage which will determine where the bullets will land vertically. Generally, each click of the knob is supposed to move the bullet’s target or impact point left or right by 0.5 inches at a 100 yards distance. To know which way to turn the knob upward and downward, look for an arrow on the knob.
And that’s how you adjust your red dot sight and the Windage-Elevation properly.